Find the Allen Bradley 1746-BAS-T-USER-MANUAL at PDF Supply. The new 1746-BAS-T-USER-MANUAL is available online and will ship today. Download the technical manual for wiring and installation instructions. 4 SLC 500 BASIC and BASIC-T Modules Publication 1746-IN009B-EN-P - August 2005 About the BASIC and BASIC-T Modules The BASIC module is a single-slot module that resides in a SLC 500 fixed or modular controller chassis. The BASIC-T module is a higher speed version of the BASIC module with identical hardware features, including two configurable.
The Allen-Bradley 1746-BAS-T SLC BASIC-T modules is part of the Allen-Bradley SLC 500 series. The battery type for the 1746-BAS-T is a battery-backed RAM with 24 KB for storing the user’s data and programs. The 1746-BAS-T SLC BASIC-T module also has a backup capacitive for the RAM on occasions when it is necessary to change the battery. For nonvolatile user storage programs, the 1746-BAS-T is furnished with a socket for a DBMEM2 or a 1771-DBMEM1 memory module. The 1746-BAS-T SLC BASIC-T is also equipped with a battery-backed clock.
The resolution for the 1746-BAS-T is 5 MS of resolution for the free-running clock. Two serial D-shell portsisolated 9-pin (PRT2 and PRT1) come with a 1746-BAS-T SLC BASIC module used to provide communication through the RS-485, RS-232/423, and RS-422 ports by using I/O devices. For the purpose of making the operator interface easy, the 1746-BAS-T has an in-built multiple LED inductor. For the 1746-BAS-T, you are cautioned against exposing the 1746-BAS-T to other places or the surface that usually carries electrostatic charges. The 1747-BAS-T SLC BASIC-T module memory might be destroyed or altered if it is exposed to the electrostatic charge.
For the 1746-BAS-T SLC BASIC-T module, the power supply load at 5 V DC is 0.15 A while the power supply load at 24 V DC is 0.07 A. The operating vibration of the 1746-BAS-T SLC BASIC-T module is 2.5 g at 57-2000 Hz. The operating and non-operating shock for the 1746-BAS-T module are 30g and 30g, respectively.
1746 Bas 5 02 User Manual 2016
The Allen-Bradley 1746-BAS is a single-slot module under the SLC 500 series. The 1746-BAS is compatible with the fixed or modular controller chassis of the SLC 500 series. The 1746-BAS has 2 configurable serial ports used for RS-232, RS-485 and RS-422 communication with I/O devices. The 1746 I/O backplane or the DH-485 channel can be used for communication with a SLC 500 via the module’s DH-485 port.
The 1746-BAS has 24K bytes battery-supported RAM with a voluntary 8K or 32K byte EEPROM memory modules that are nonvolatile. It also features LED indicators to enhance operation monitoring. The 1747-M1, 1747-M2, 1747-M3 and the 1747-M4memory modules are compatible with the 1746-BAS. These modules are programmed with an ASCII terminal or using the 1747-PBASE BASIC developer software.
1746 Bas 5 02 User Manual 2017
The PRT1 communication port on the 1746-BAS is a serial port. It is used to interface the module with external devices. This port has the RS-232/RS-423, RS-422 and RS-485 communication ports. The PRT1 port has full duplex capabilities and can operate at 300, 600, 1200, 2400, 4800, 9600 and 19200 bps.The 1746-BAS has two extra ports: the PRT2 and DH-485 port. The PRT2 port is used to interface the module with external devices using the DFI protocol. This port has full duplex capabilities. The DH-485 port is used to connect the module to a DH-485 network. To use the DH-485 port the 1747-AIC link coupler must be used to connect the port with the DH-485 network. Note that when the DFI protocol is enabled on PRT2 the DH-485 communication is inactive.